Page 1 of 1
Custom Firmware from 3.9 to 5.0(Help)
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 1:55 am
by Sazquatch
First, I've donwloaded, NBA 2k10, and it works for 3.9 version.
But now, I've updated my custom firmware from 3.9 to 5.00.
Unfortunately, I can't open now my games especially the 2k10 game,
and this one appearing
(This game could not be started.(80010013)).
What seems to be the problem? Can you possibly help me on this? Thanks.
Edit/Delete Message
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 4:10 am
by BKFraiders7
try going into the CFW mainscreen (hold down R (or LR i dont remember)when you boot up your psp..like pull the battery and do it). Then change what firmware it says
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 12:53 pm
by AdventWolf
What ISO loader are you using? Press select while on the XMB and switch between the loaders.
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 5:19 pm
by The Cookie Monster
BKFraiders7 wrote:try going into the CFW mainscreen (hold down R (or LR i dont remember)when you boot up your psp..like pull the battery and do it). Then change what firmware it says
it was "hold down R"
![Cool 8)](./images/smilies/icon_cool.gif)
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 5:34 pm
by airplanes18
yeah id say set your ISO mount to either M33 or SONY(other number here)
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 5:45 pm
by AdventWolf
I think the Sony (NP766 or w/e) driver is the best one, I have always used it and have had no problems loading games.
I'm thinking the OP might be using a different one.
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
Posted:
Thu Oct 08, 2009 5:55 pm
by airplanes18
thanks for reminding me the numbers, sony np 987 (close enough) you get the idea, right?