Page 1 of 1

bricked or not

PostPosted: Tue Mar 15, 2011 12:32 am
by busabill
i installed 3.60 spoof patch now i cant get any out put from hdmi component or scart
and my controller keeps turning off cfw 3.55

Re: bricked or not

PostPosted: Tue Mar 15, 2011 7:13 am
by D3ViLsAdvocate
You have to go into recovery mode and reflash.

Here is the procedure for access:
- Put the PS3 in standby (red LED)
- Hold down the power button: the system will turn on and turn off at the third beep
- Once off the PS3, hold down the power button again, you will hear 2 beeps and beeps twice
- At this point you will be prompted to connect the controller to the USB port
- Press the PS
- If you present a menu with the following options:
• Restart System: Please restart the PlayStation 3.
• Restore Default Settings: Reset all system settings to default
• Restore File System: Check any system files corrupted or missing.
• Rebuild Database: Rebuilds the OS PLAYSTATION 3.
• Restore PS3 System: reset: erase everything and start again from the factory defaults.
• System Update: Update the PLAYSTATION 3 firmware with a user-supplied