[PS3/PS2] Dualshock USB Controller Mod.
![Post Post](./styles/ca_gen2/imageset/icon_post_target.gif)
THIS ONLY POWERS THE PS2 CONTROLLER IT DOES NOT ACTUALLY WORK IT JUST TURNS ON THE ANALOG LIGHT! ALSO IM USING A PS2 CONTROLLER SO IT MAY NOT WORK ON PS3!
I am still working on this mod but i decided to make a tutorial so if anyone gets further than get tell me.
1. Cut the Controller and USB Wire and then strip both. I AM NOT RELIABLE FOR ANY PROBLEMS
2. Connect the Black and Gray wire on the controller. (GROUND) To the Black wire on the USB.
3.Connect the Pink wire on the Controller to the red one on the USB.
4.Tape them up.
5. Plug the USB into a Port on your comuter. I AM NOT RELIABLE IF YOUR USB PORT GETS FRIED!
6. The analog light should turn on.
If you get any further and get the controller to function please post it i have been working on this mod for awhile and gave up for a bit!
I am still working on this mod but i decided to make a tutorial so if anyone gets further than get tell me.
1. Cut the Controller and USB Wire and then strip both. I AM NOT RELIABLE FOR ANY PROBLEMS
2. Connect the Black and Gray wire on the controller. (GROUND) To the Black wire on the USB.
3.Connect the Pink wire on the Controller to the red one on the USB.
4.Tape them up.
5. Plug the USB into a Port on your comuter. I AM NOT RELIABLE IF YOUR USB PORT GETS FRIED!
6. The analog light should turn on.
If you get any further and get the controller to function please post it i have been working on this mod for awhile and gave up for a bit!